430 Stainless Steel Flat Bar-manufacture,factory,supplier from China

430 stainless steel sheet #4 finish is the brushed finish commonly seen on kitchen appliances and backsplashes. 430 Stainless Steel Sheet #4 finish has a PVC film on one side to help protect against scratching during fabrication and installation. Our 430 stainless steel sheet metal meets the criteria for both the #3 and #4 finish.If the 430 stainless steel sheet #4 finish is under 48" long, the customer has a choice on which way the grain of the brushed finish runs (for a 10% extra cost).

Features of Flat Welding FlangesWhen welding flat welding flanges, only one side welding is required, and there is no need to weld the inner port of the pipe and flange connection. The welding installation of butt welding flanges requires double-sided welding of the flanges. Therefore, flat welding flanges are generally used for low and medium pressure pipelines, and butt welding flanges are used for the connection of medium and high pressure pipelines. Butt welding flanges are generally at least PN2.5MPa. Butt welding is used to reduce stress concentration.

Stainless steel profile and flat steel made in ChinaStainless steel profile belongs to a kind of stainless steel profile, its shape can be divided into many kinds, the most common for Angle steel, flat steel, channel steel and so on.       Stainless steel flat is rectangular steel with slightly pure edges. Stainless steel flat steel can be semi-finished steel. There are cold drawn polished stainless steel flat and hot rolled acid white sandblasted stainless steel flat.Mainly divided into equilateral and unequal two categories, equilateral also known as stainless s

Stainless steel can be roughly divided into flat steel and concave-convex steel. The flat steel plate can be divided into three categories: mirror steel plate with surface light reflectivity greater than 90%; The reflectivity is 50%~90% of the light plate; Matte steel plate with reflectivity less than 50%.

How to identify the quality of stainless steel sinks?1. Thickness of water tank steel plate: The high-quality water tank adopts imported 304 stainless steel plate with a thickness of 1mm, while the ordinary low-grade water tank adopts 0.5mm-0.7mm. The method of identification can be determined from the weight and whether the surface is flat.2. Anti-noise treatment: The bottom of the high-quality sink is sprayed or glued with rubber sheets and does not fall off, which can reduce the sound caused by the impact of the water from the faucet on the bottom of the basin, and play a buffering role.3.

SS 304 Round Bar Suppliers, Ready Stock Of ASME SA276 Grade 304 Flat Bar In 3mm Thickness X 25mm WidthThe austenite crystalline microstructure of Stainless Steel 304 round bar is achieved by the addition of manganese as well as nickel to its alloy. The ss 304 flat bar is a stainless steel grade that can be enveloped by two different ASTM specifications i.e ASTM A479 as well as ASTM A276.

Stainless steel coil: Material: SUS201, 202, 304, 316L, 316Ti, 321, 304L, 441, 444, 436, 439, 430, 409L, 410S, 309S, 310S, 904L, 2205, 2507, etc.  Thickness: 0.3-16.0mm, width 1 meter, 1.22 meters, 1.5 meters, 1.8 meters, 2 meters, non-standard can be customized.   Stainless steel properties:As a widely used steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties;  Stamping, bending and other hot workability, no heat treatment hardening phenomenon (use temperature -196℃~800℃).  Household products (cl

Loose flange: This kind of flange is often used in the case where the medium temperature and pressure are not high and the medium nozzle is highly corrosive. The loose flange is generally used in combination with the flanging short joint, that is, the flange ring is loosely sleeved outside the flanging short joint, the pipe is butt welded with the flanging short joint, and the flange sealing surface is processed on the flanging short joint.In addition, there are flat welding ring and butt welding ring plate loose flange.

Grade 303/1.4305 Stainless bar is a non-magnetic, austenitic, free machining stainless steel that is a modification of the basic 18Cr – 8Ni stainless steel. The addition of sulphur (S) and in some cases selenium (Se) produces excellent machining characteristics while maintaining good mechanical and corrosion-resistant properties and high resistance to oxidation. The high sulphur content that dramatically increases cutting speeds also reduces the grades formability making type 303 not readily cold workable.

OverviewQuick DetailsGrade:400 Series 300 Series 200 SeriesStandard:JIS, AiSi, ASTM, GB, DIN, EN, AISI, ASTM, DIN, EN, GB, JISLength:Customized, CustomizedPlace of Origin:Shandong, ChinaModel Number:201,304,308,316,316l 321 310s etcType:RoundCertification:ISO9001"Product name:stainless steel round bar astm a479 tp316 tp316l""Dimensions:DIA 4mm-500mm"Shape:Round, Sheet/Flat/Rod/Square/channel..etc"Surface:2B, 2D, No.1, No.4, BA, HL, 6K, 8K ,etc"Certificate:ISO9001Supply Ability:5000Ton/YearPackaging & DeliverySelling Units:Single itemSingle package size: 30X10X