Floor-manufacture,factory,supplier from China

About why wires and cables are twisted:1. Copper wires of different specifications and different numbers are twisted together in a certain arrangement order and laying pitch to become a conductor with a larger diameterThis stranded large-diameter stranded conductor is softer than a single copper wire of the same diameter, and the resulting wire has good bending performance and is not easy to break during a swing test.

       Incoloy 925 is an age-hardened nickel-iron-chromium alloy with additions of molybdenum, copper, titanium and aluminum. The chemical composition of this alloy is designed to provide a combination of high strength and excellent corrosion resistance. The nickel content is sufficient to prevent chloride ion stress corrosion cracking. Nickel, along with molybdenum and copper, also provides significant resistance to chemical reduction. Molybdenum helps resist pitting and crevice corrosion. The chromium content of the alloy resists oxidizing environments.

Introduction:Alloys comparable to Incoloy 825 alloys are high Ni, highly corrosion-resistant nickel-based alloys with extremely high corrosion resistance to both oxidizing and non-oxidizing acids.Incoloy 825 alloy has good general corrosion resistance to both oxidizing and non-oxidizing acids due to its rich content of Cr, Mo and Cu. In particular, it has extremely high corrosion resistance to sulfuric acid. Due to the high content of Cr, Mo and Ni, it has excellent pitting corrosion resistance, crevice corrosion resistance and stress corrosion cracking resistance in chloride environment.

What is 2205 Stainless Steel?2205 stainless metal is a ferritic-austenitic grade composed of 22% chromium, 5% nickel, and 3-4% molybdenum. It has first-rate corrosion resistance in each freshwater and brackish water environments, making it an perfect desire for marine purposes such as boat fittings and anchors.

Stainless steel Angle steel uses:1. stainless steel Angle steel is widely used in the construction of the layout, as well as a variety of engineering layout, such as the construction of the beam, has a significant effect in the construction of engineering equipment,2. Stainless steel Angle steel in use, has contrast weldability, and, has a strong shape and deformation, and also has a certainMechanical strength.

Laying points of stainless steel elbow in pipeline:1. In order to reduce the heat loss of the stainless steel elbow and prevent thermal deformation, the buried depth of the pipeline should be greater than 1.2 meters. (calculated from the top of the pipe). The burial depth in alpine regions should be appropriately deepened. At the same time, all pipes should be avoided to be laid below the water table.2. For areas where the groundwater level is high or it is difficult to dig deep for other reasons, measures should be taken as far as possible to avoid water insulators before burying the pipes.

321 stainless steel plates are part of the austenitic family of stainless steel. 321 is basically a 304 grade containing a stabilizer of titanium. Type 321 is a good choice for applications where heat is an issue. 321 can be used in applications up to 900°C where 304 is normally used up to 500°C. Grade 321 has excellent forming and welding characteristics.

Although stainless steel plates account for a relatively small proportion of world steel consumption, they are still vital to specific manufacturing industries such as the energy and food processing markets. At present, the global consumption of stainless steel plate materials is continuously increasing.In recent years, technological progress has significantly improved the quality of plasma cutting of stainless steel plates. These advancements span a range of thicknesses and have reached 6.25 inches.The early plasma cutting consumes a high current and the cutting speed is also very slow.

At present, there are few cases of large area stainless steel curtain wall in the field of building exterior wall. Even if large area is adopted, it often does not pursue its high flatness, but only expresses strong texture.For The Chicago Cloud Gate project, each individual steel plate was CNC machined at the factory, cut with a stainless steel plasma torch 3/8 inches thick, and molded using a coil machine created specifically for the project.

Seawater corrosion resistant materials, and widely used in Marine engineering. However, in practical engineering application, the stainless steel connection, especially the welding area, often appears various corrosion damage, resulting in a great loss. Therefore, in this paper, according to the characteristics of seawater corrosion of stainless steel, the seawater corrosion and anticorrosion mechanism of its weld site were comprehensively analyzed and studied.