Silver White-manufacture,factory,supplier from China

Stainless steel profile and flat steel made in ChinaStainless steel profile belongs to a kind of stainless steel profile, its shape can be divided into many kinds, the most common for Angle steel, flat steel, channel steel and so on.       Stainless steel flat is rectangular steel with slightly pure edges. Stainless steel flat steel can be semi-finished steel. There are cold drawn polished stainless steel flat and hot rolled acid white sandblasted stainless steel flat.Mainly divided into equilateral and unequal two categories, equilateral also known as stainless s

Structural features:Threaded flanges manufactured in accordance with ASME B16.5 are similar to sliding flanges, but the holes shall have tapered pipe threads in accordance with ASME b1.20.1. The thread shall be concentric with the axis of the flange opening, and the alignment deviation (perpendicular to the flange face) shall not exceed 5mm per meter. Threaded flanges are NPs 1 / 2 to NPs 24 in size and pressure classes are 150, 300, 400, 600 and 900. The sizes of class 1500 and 2500 are NPs 1 / 2 to NPs 2 - 1 / 2.Class 150 threaded flange has no counterbore.

Types of Socket Weld FlangesSocket Weld Raised Face FlangeRaised Faced Socket weld Flanges4 Bolt Socket Weld flange300# Socket Weld FlangeANSI B16.5 Socket weld FlangesSocket weld Flange DimensionsASME B16.5 SWRF FlangesANSI B16.5 Class 150 Socket weld FlangesStainless Steel Socket weld Flanges Suppliers1 inch Socket weld FlangeSocket weld Ring Type Joint FlangesASME B16.47 Series A and B SWRF Flanges2 inch Socket weld Flange3 inch Socket weld FlangeANSI B16.5 class 150 SWRF Flange StockholderANSI 150 Socket weld Flange4 inch Socket weld FlangeHigh Quality SWRF FlangesFlat Face SWRF Flange6 in

About why wires and cables are twisted:1. Copper wires of different specifications and different numbers are twisted together in a certain arrangement order and laying pitch to become a conductor with a larger diameterThis stranded large-diameter stranded conductor is softer than a single copper wire of the same diameter, and the resulting wire has good bending performance and is not easy to break during a swing test.

Implementation principleThreaded flange is a kind of non-welded flange, which processes the inner hole of the flange into pipe threads, and is matched with the threaded pipe to realize the connection. Compared with the flat welding flange or the butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines where welding is not allowed. Alloy steel flanges have sufficient strength, but are not easy to weld, or the welding performance is not good, and threaded flanges can also be selected.

The difference between cold-rolled steel and hot-rolled steel is not in the smelting process, but in the rolling temperature, or the end temperature of rolling. When the final rolling temperature is lower than the recrystallization temperature of the steel, it is called cold rolled steel. Hot-rolled steel is easy to roll and has high rolling efficiency, but under hot-rolled conditions, the steel is oxidized, and the surface of the product is gray and dark.

Chrome steel is bendy and stylish . it’s the preferential choice for a few of the surrounded programs and industries.The fabrication and forming approaches are fundamentals which will make stainless-steel clean for utility. hot rolling and cold rolling are the forming strategies that offer a finish to the stainless-steel surface.Stainless steel features are optimized through the use of warm rolling and bloodless rolling. the current rolling and cold rolling can improve mechanical characteristics significantly without altering its chemical composition.

Surface Treatment  Surface FinishDefination2BThose finished,after cold rolling,by heat treatment,picking or other equivalent treatment and lastly by cold rolling to givenappropriate lusterBAThose processed with bright heat treatment after cold rollingNo.1The surface finished by heat treatment and picking or processes corresponding there to after hot rollingNo.4Those finished by polishing with No.150 to No.180 abrasives specified in JIS R 6001HLThose finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size8KA mirror-like reflective surface

DifferenceProductivityCompared with manual welding electrodes, the continuous welding method of flux-cored welding wire has high production efficiency.

Material grade: ER70S-6Standard: ASMEIt belongs to copper-plated low-alloy steel gas shielded welding wire. It uses C02 or argon-rich shielding gas for welding. It has excellent welding process performance, stable arc combustion, less spatter, beautiful weld shape, and low sensitivity to weld metal pores. The position welding process is good.